IMOU Router Login

Imou Router Login: Default IP, Username & Password + Complete Setup Guide

You’ve just unboxed your Imou router, connected it to your modem, and now you need to get into the admin panel — but the login page isn’t loading, or you’re not sure what the default credentials even are. It’s a frustrating spot to be in, and one many Imou users hit within the first five minutes of setup.

This guide walks you through everything: the correct login URL, default username and password, how to change your WiFi settings, and what to do when the login page refuses to cooperate.

What Is the Imou Router Login Page?

The Imou router admin panel is a web-based interface that lets you control your router’s settings directly from a browser — no app required. From here you can change your WiFi network name (SSID), update your password, configure dual-band settings, assign static IPs, set up port forwarding, and update firmware.

The Imou web interface is accessible via http://imouwifi.net or http://192.168.10.1. Both addresses lead to the same login screen. Which one works depends on whether your device can resolve the hostname — if imouwifi.net fails, the IP address almost always works. 192.168.1.1

This is the router admin panel, separate from the Imou Life app. The app is for managing Imou cameras; the admin panel is specifically for managing the router hardware itself.

Imou Router Default Login Credentials

Before you open a browser, you need the right credentials. Here’s what to know:

The default username is admin, and the password is printed on a sticker on the back of the router. The IP address is also listed there. 192.168.1.1

For models like the Imou N300 and HR300, the default account and password is admin, and the default gateway is http://192.168.10.1

A quick reference:

If you’ve changed the password previously and forgotten it, the only recovery option is a factory reset (covered below).

How to Access the Imou Router Admin Panel (Step-by-Step)

Step 1: Connect to Your Imou Router

Your device — phone, laptop, or PC — must be connected to the Imou router’s network before the admin page will load. You can connect via WiFi or an Ethernet cable directly into one of the LAN ports.

One important detail: turn off mobile data on your phone before trying to access the admin panel. When mobile data is active, your phone may route browser traffic through your carrier instead of the local network, which means 192.168.10.1 will either time out or return an error.

Disable any VPN as well. VPNs reroute traffic and will prevent the browser from reaching the router’s local IP.

Step 2: Open a Web Browser and Enter the Login URL

Open Chrome, Firefox, Edge, or Safari — any modern browser works. In the address bar, type:

http://192.168.10.1

or

http://imouwifi.net

Do not type this into a search engine. It must go directly into the address bar. Adding http:// at the beginning matters; without it some browsers treat the input as a search query.

Step 3: Enter Your Credentials

Enter the username admin and the password from the sticker on the back of the router, then click Login. 192.168.1.1

If the sticker is worn or unreadable, try admin as both the username and password — some models ship with this as the default. If that doesn’t work, a factory reset is your next step.

Step 4: Navigate the Admin Dashboard

Once logged in, you’ll see the main dashboard. From here you can change the WiFi Network Name, security mode, and WiFi password. For dual-band routers, you’ll need to configure the 2.4 GHz and 5 GHz networks separately, unless you enable the Dual Bands in One option to combine them. 192.168.1.1

How to Change Your Imou Router WiFi Name and Password

This is the most common reason people log into the admin panel. After logging in via http://imouwifi.net, follow the on-screen instructions to configure your internet connection. For security, change the default SSID to something unique and assign a strong password.

Steps to update WiFi credentials:

1. Log into the admin panel using the steps above
2. Navigate to the WiFi or Wireless section
3. Update the WiFi Name (SSID) field with your preferred name
4. Set Security Mode to WPA/WPA2 Personal
5. Enter a strong password in the WiFi Password field
6. Click Save

After saving, all devices connected to the old network name will disconnect and need to reconnect using the new credentials — including your phone if you’re using WiFi to access the admin panel.

Common Imou Router Login Problems and How to Fix Them

Login Page Not Loading

This is the most reported issue. The cause is almost always one of the following:

You’re not connected to the Imou router. Confirm your device is on the Imou network, not a neighboring WiFi or mobile data.

Mobile data is interfering. On a smartphone, disable mobile data completely before typing the IP into the browser.

VPN is active. Disconnect from any VPN before attempting to reach the local IP.

Wrong IP address. While 192.168.10.1 is standard for most Imou routers, a small number of models use 192.168.1.1. If the first address fails, try the alternative.

Browser autocomplete is redirecting. Type the full URL including http:// to avoid the browser treating it as a search.

Forgotten Admin Password

If you’ve changed the admin password and forgotten it, the router has no password recovery feature — you’ll need to reset it.

Press and hold the reset button on the router for more than 5 seconds to restore it to factory mode. After resetting, use the default credentials from the label to log back in and reconfigure your settings from scratch.

5 GHz Band Not Showing

Some Imou dual-band models like the HX21/AX3000 have reported issues where the 5 GHz band does not appear on certain devices. This is typically resolved through a firmware update or by manually enabling the 5 GHz band in the admin panel under WiFi settings.

Common Mistakes to Avoid

Using a search engine instead of the address bar. Typing 192.168.10.1 into Google returns search results, not your router’s login page.

Forgetting to disable mobile data. On mobile devices, this single oversight is responsible for most failed login attempts.

Leaving the default password unchanged. The label password is printed on the outside of the device. Changing it during initial setup is essential for basic network security.

Changing settings while connected via WiFi without saving. If you change the WiFi password and click save while connected wirelessly, your connection drops immediately. This is expected behavior, not an error — just reconnect with the new credentials.

Skipping firmware updates. Outdated firmware causes stability issues, login problems, and compatibility errors, particularly on newer devices connecting to older router software. Check the admin panel’s system section periodically for available updates.

FAQ

Q: What is the default IP address for Imou router login?
A: The default login IP for most Imou routers is 192.168.10.1. You can also use the hostname http://imouwifi.net. Both lead to the same admin panel. If neither works, ensure your device is connected to the Imou router and that mobile data and VPN are disabled.

Q: What is the default username and password for Imou router?
A: The default username is admin. The default password is printed on the sticker on the back or bottom of the router. Since every unit may have a unique label password, there is no universal default password — check the physical label on your specific device.

Q: Why is my Imou router admin page not loading?
A: The most common reasons are active mobile data routing traffic away from the local network, an active VPN, not being connected to the Imou router’s network, or typing the IP into a search bar instead of the browser address bar. Disable mobile data and VPN, confirm network connection, and type http://192.168.10.1 directly into the browser’s address bar.

Q: How do I reset my Imou router to factory settings?
A: Press and hold the reset button on the back of the router for more than 5 seconds. The router will restart and return to factory defaults. After resetting, use the credentials on the label to log back in. Note that all custom settings — WiFi names, passwords, and configurations — will be erased.

Q: Can I access the Imou router admin panel from my phone?
A: Yes. Open any mobile browser, disable mobile data and VPN, ensure you’re connected to the Imou router’s WiFi, and type http://192.168.10.1 in the address bar. The admin interface is mobile-compatible on most Imou models.

Q: What should I do if I forgot my Imou router admin password?
A: If you’ve changed the admin password and no longer remember it, a factory reset is the only option. Hold the reset button for over 5 seconds to restore defaults, then log in with the credentials from the router label and reconfigure your settings.

Q: How do I change my Imou router WiFi name and password?
A: Log into the admin panel at http://192.168.10.1, navigate to the WiFi section, update the SSID and password fields, set security mode to WPA/WPA2, and click Save. For dual-band models, configure 2.4 GHz and 5 GHz networks separately unless you enable the combined band option.